BDS121260 | BDS Suspension Upper Control Arm Kit For Chevrolet Silverado / GMC Sierra 1500

Features & Benefits

• High strength 1.5-inch tubular construction improves strength and durability over stock UCA
• Indexed ball joint cup allows for increased travel on leveled/lifted applications
• Factory style rubber bushings for long lasting, maintenance-free operation
• High quality greaseable ball joints and a protective cap to keep out debris
• Fully assembled and ready to install right out of the box

Important Notes

1. Control arms typically add 1-2 degrees caster above stock alignment specifications.
2. Ball joint used is 081203, use this for replacement purposes if a new ball joint is ever needed. Ball joint is directional and must be installed with the 'dot' facing either inward or outward on the vehicle, otherwise damage may occur.
3. The BDS121260 UCA will work for stock height vehicles. These BDS121260 UCA will work with most leveling kits, such as the 2" ZONE leveling kits and all 4" and 6" BDS kits, along with 4" Trail Boss or AT4 kits.
4. Will not work with ARC.  Use BDS121261 for the 4" and 6" ARC kits.
5. Use a maximum of 5.5" BS wheel for tire clearance to the upper ball joint when used on 2-3.5" kits. Can be used on 4-6" BDS kits with 6.25" BS (Factory) Wheel.

Installation

Specification

• Bushing Material : Rubber
• Bushings Included : Yes
• Grease Fitting Included : Yes