Home - Return to Previous Page
75240 | Rough Country 6 Inch Lift Kit Toyota Tundra 4WD | M1 Struts With M1 Rear Shocks
For 2016 - 2021 Toyota Tundra RWD / 2016 - 2021 Toyota Tundra 4WD
75240
Availability:
Was:
$2,737.95
Sale:
$2,327.26
Save:
15%
Save:
$410.69
Description
You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.
Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
Features
- Unmatched ground clearance due to high clearance crossmember design.
- 100% precision laser cut materials used in latest computer aided design process.
- Levels the front with the rear of the vehicle
- Will work with factory 18-inch or larger wheels.
- Requires no modification to the stock differential mounts, drivetrain or exhaust.
- Fabricated blocks are stronger and offer a longer lifespan than cast
Optional Vertex Coilovers
- 8-Stage Adjustable Damping
- Monotube Design
- Nitrogen-Charged
- Massive 2.5in Piston
- 3-Stage Seal System
- Only fits 4WD models
- 3-year Manufacturer's Warranty
Optional V2 Monotube Shocks
- Incredible ride quality & performance
- Monotube design
- Nitrogen-charged
- 46mm high-flow piston
- Mounts inverted
- 36kN Tensile Strength
- 3-year Manufacturer's Warranty
Optional N3 Struts
- Maintains smooth, factory-like ride
- Infinitely Variable Damping
- Leak-proof piston seal
- Massive 1 3/8in Bore
- Increased ground clearance
- Only fits 4WD models
- 3-year Limited Warranty
Fitment Notes
- Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
- Cutting and drilling is required.
- Does NOT fit Pro Series models.
- On TRD models equipped with a red rear sway bar it must be removed for installation.
- Does NOT fit XSP-X models.
- Requires 18-inch or larger wheels.
- Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
- In some cases minor trimming may be needed to clear 35-inch tires.
- On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
Specifications
- Est. Install Time: 8-10 hours
Application List
2016 - 2021 Toyota Tundra 4WD
2016 - 2021 Toyota Tundra RWD
Fitment Notes
Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
Cutting and drilling is required.
Does NOT fit Pro Series models.
On TRD models equipped with a red rear sway bar it must be removed for installation.
Does NOT fit XSP-X models.
Requires 18-inch or larger wheels.
Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
In some cases minor trimming may be needed to clear 35-inch tires.
On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
2016 - 2021 Toyota Tundra RWD
Fitment Notes
Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
Cutting and drilling is required.
Does NOT fit Pro Series models.
On TRD models equipped with a red rear sway bar it must be removed for installation.
Does NOT fit XSP-X models.
Requires 18-inch or larger wheels.
Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
In some cases minor trimming may be needed to clear 35-inch tires.
On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
Component List
Front:
Lifted knuckles
Strut spacers
Front crossmember
Rear crossmember
Steering stops
Brake line brackets
Differential drop brackets
Bumpstop brackets
Sway-bar brackets
Lower skid plate
Hardware
Rear:
Fabricated lift blocks
U-bolts
Brake line brackets
Hardware
Shocks:
(2) Premium Shocks (Rear)
Lifted knuckles
Strut spacers
Front crossmember
Rear crossmember
Steering stops
Brake line brackets
Differential drop brackets
Bumpstop brackets
Sway-bar brackets
Lower skid plate
Hardware
Rear:
Fabricated lift blocks
U-bolts
Brake line brackets
Hardware
Shocks:
(2) Premium Shocks (Rear)
Details
- 75240
- 75240
- 840269918681
- Rough Country
- New
Categories
Shipping Information
- Item Requires Shipping
- 149.0 lbs.
- W24.0000” x H12.0000” x L48.0000”
- Free Ground Shipping | Exclusions Apply*