DJM2045H-55LTD-1.25-ROTOR | DJM Suspension 5 Inch Front / 5 Inch Rear Lowering Kit (1973-1987 C10 Pickup 2WD with 1.25 Inch Rotors)

1973 – 1987 C10 Complete Lowering Kit

You will have either a 1 inch or 1.25 inch rotor. If you have a 1" rotor use (DJM2045L-5/5).  The 3 inch lowering spindle combined with a set of 2 inch engineered springs will lower the front about 5 inches total.

The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No "C-section" required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.

Shocks are included. DJM recommends:

• Front Shock 1309 (Sold Each)
• Rear Shock 2100 (Sold Each)

Drop SpindlesFront Coil SpringsRear Flip Kit

Additional information

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

1963 - 1987 C-10 2"Front Lowering Coil Spring

1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates

13.5" Loop / Loop SuperShock (1309)

21.5" Loop/ Loop SuperShock (2100)