DJM2045H-35LTD | DJM Suspension 3 Inch Front / 5 Inch Rear Lowering Kit for 1973-1987 C10 Pickup 2WD with 1.25 Inch Rotors (Shocks Included)

1973-1987 C10 Complete 3 inch Front / 5 inch Rear Lowering Kit (For 1.25 inch brake rotors)

Note: For trucks with 1.25 inch thick brake rotors. If you have a 1 inch rotor use (DJM2045L-3/5).

Drop spindles are used to lower the front 3 inches. The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No "C-section" required and there are new u-bolts and leaf spring plates included to replace the original parts if they need to be replaced.

Shock are included with this kit. DJM recommends:

• Front Shock 1409 (sold each)
• Rear Shock 2100 (sold each)

Drop Spindle InstructionsRear Flip Kit Instructions

Additional information

1973 - 1987 C10 3 Inch Drop Spindles (1.25 Inch Rotor)

1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates

14.5" Loop / Loop SuperShock (1409)

21.5" Loop/ Loop SuperShock (2100)