DJM2456-55+LTD | DJM Suspension 5 Inch Front / 5 Inch Rear Lowering Kit for 1973-1987 C10 Pickup 2WD (Shocks Included)

1973 – 1987 C10 Complete DJM 5/5 Plus Kit

It's probably time for new bushings and ball joints, why not get them already installed in a new Calmax Lower Arm and have 3" of drop as a bonus! From our factory, new ball joints, mounting shafts with urethane bushings and urethane bumpstops are installed. You can literally take it out of the box and install in the factory location with out doing anything else, sweet!

The rear is a flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No "C-section" required and there are new U-bolts and leaf spring plates included to replace the original parts if they need to be replaced.

The same kit as the DJM2456-5/5 PLUS Calmax Upper Control Arms DJM's Plus kits add value to your complete suspension kit by including upper control arms. The upper arms are an option for most kits that will help nail down a good alignment and have the bonus of style so all of your suspension components have that Calmax "look". Choosing a plus kit gives you the best deal on a complete lowering kit and if you add Calmax SuperShox you have the best kits for the best price!

Replacement parts

• Ball Joint 6117
• Bushing Kit BK2356L

Lower Control Arm InstructionsUpper Control ArmsFront Coil Spring InstructionsRear Flip Kit Instructions

Additional information

1973 – 1987 Chevy C-10 Upper Control Arms (Disc brakes only)

1971-1987 C10 3 inch Lowering Control Arms (Disc Brakes Only)

1963 - 1987 C-10 2"Front Lowering Coil Spring

1973-1987 C10 5 inch Rear Flip Kit with New U-bolts and Spring Plates

13.5" Loop / Loop SuperShock (1309)

21.5" Loop/ Loop SuperShock (2100)