DJM2515-46 | DJM Suspension 4 Inch Front / 6 Inch Rear Lowering Kit for 2015-2018 Silverado, Sierra 1500 2WD with OEM Cast Aluminum Steering Knuckles (Shocks Included)

2015-2018 Silverado/Sierra Complete 4 inch Front / 6 inch Rear Lowering Kit

A combination of upper and lower control arms with stock coil springs drop the front 4 inches.  Factory alignment, correct ball joint angles and steering clearances are all retained for an exceptional lowered ride. New ball joints, urethane bushings and "twin sleeve" pivot tubes come assembled for simplified installation.

The rear kit consists of an axle flip kit with pinion adjustable axle brackets. New shackle hangers that invert the shackle mounting point reposition the leaf  springs for a 6 inch total drop (Recommended for 2wd on any drop beyond 2inches in front)

For 2015 (2014 4x4 and early 2016) please check out this blog to make sure you have the right parts

Shocks are included. DJM recommends:

• Factory front Shock/Strut
• Rear Shock 1900 (sold each)

Replacement Parts

• Upper Ball Joint 6292
• Lower Ball Joint 6015
• Upper Bushing Kit BK2007U
• Lower Bushing Kit BK2007L

Upper Control Arm Instructions

Additional information

2015-2018 Silverado, Tahoe, Suburban 4 inch Lowering Control Arm Set

2007-2018 Silverado/Sierra 6 inch Rear Lowering Kit

18.5" Loop / Loop SuperShock (1800)