DJM2515-34 | DJM Suspension 3 Inch Front / 4 Inch Rear Lowering Kit for 2015-2018 Silverado, Sierra 1500 2WD with OEM Cast Aluminum Steering Knuckles (Shocks Included)

2015-2018 Silverado/Sierra with Aluminum Steering Knuckle Complete 3inch Front/ 4 inch Rear Lowering Kit

Note: For 2WD trucks with aluminum steering knuckles only.

Upper and lower control arms with factory coil springs drop the front 3 inches.  Factory alignment, correct ball angles and steering clearances are all retained for an exceptional lowered ride.  New ball joints, urethane bushings and "twin tube" pivot sleeves come assembled for simplified installation.

The rear kit consists of an axle flip kit featuring pinion adjustable axle brackets and new shackle hangers that invert the shackle mounting point allowing the longer shackles included to lift the rear end four inch total drop position.

Click here DJM2507-2/3 for cast iron steeling knuckles.

Shocks are NOT included with this kit. DJM recommends:

• Factory front Strut/Shock
• Rear Shock 2100 (sold each)

Replacement Parts

• Upper Ball Joint 6292
• Lower Ball Joint 6015
• Upper Bushing Kit BK2007U
• Lower Bushing Kit BK2007L

Additional information