DJM2000-35+ | DJM Suspension 3 Inch Front / 5 Inch Rear Lowering Kit with Upper Control Arms for 2001-2006 Suburban, Tahoe, Yukon 2WD/4WD (Shocks Included)

To get serious lowering going on, use Calmax control arms up front which keep the factory spring rate and load on your torsion bars while lowering 3". Drop coils replace the factory springs in the rear for a 5" drop. A rear kit includes brackets and hardware to keep the trailing arms away from the frame and positions the factory sway-bar so it can move freely with out contact by including offset swaybar endlinks!

DJM’s Plus kits add value to your complete suspension kit by including upper control arms. These upper arms are an option for most kits that will help nail down a good alignment and have the bonus of style.

Shocks are Required and included with this kit:

• Shock number 1315 (sold each)
• Shock number 1800 (sold each)

• Replacement parts
  • Upper Ball Joint K6540
  • Lower Ball Joint K6541
  • Upper Bushing Kit BK2000U
  • Bushing kit BK2001L

Lower Control ArmsUpper Control ArmsRear Kit Instructions

Additional information

2000-2006 Tahoe/Yukon, Silverado/Sierra (Torsion bar only), Suburban/Yukon XL, Avalanche Upper Control Arms for Torsion Bar Front End

2001–2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Drivers Side)

2001-2006 Avalanche, Tahoe and Suburban Lowering Control Arm (Passengers Side)

2001–2006 Avalanche, Suburban and Tahoe 5 inch Rear lowering Coil Springs

2000–2006 Avalanche, Tahoe and Suburban Rear Lowering Hardware Kit

13.5″ Stem / Loop SuperShock (1315)

18.5″ Loop / Loop SuperShock (1800)