DJM2507-24 | DJM Suspension 2 Inch Front / 4 Inch Rear Lowering Kit for 2007-2015 Silverado, Sierra 1500 2WD (Shocks Included)
2007-2015 Chevrolet Silverado 1500 2WD | 2007-2015 GMC Sierra 1500 2WD
Description
2007-2015 Silverado 2 inch Front / 4 inch Rear Complete lowring Kit (Cast Iron Steering Knuckle)
Upper and lower control arms combined with factory coil over struts lower the front 2 inches. Full alignment, correct ball joint angles, and clearance are engineered into our parts for an exceptional ride. The rear consists of an axle flip kit featuring adjustable axle brackets that correct the pinion angle new shackle hangers that invert the shackle mounting point allowing the new longer shackles lift the rear end to the 4 inch drop position.
For 2015 (2014 4x4 and early 2016) please check out this blog to make sure you have the right parts
Replacement Parts
- Lower Ball Joint 6541
- Lower Bushing Kit BK2007L
Additional information
2008-2015 Silverado/Sierra, Tahoe/Yukon 2 inch Lowering Control Arms
| Weight | 30 lbs |
|---|
2007-2018 Silverado/Sierra 4 inch Rear Lowering Kit
| Weight | 30 lbs |
|---|
22.5″ Loop/ Loop SuperShock (2200)
| Weight | 3 lbs |
|---|
Vehicle Applications
2007-2017 GMC Sierra 1500 2/4wd
* 2WD only - not intended for 4WD platform
* Vehicles Equipped with Cast Iron Steering Knuckles
Components
RK2507-4 4 Inch Rear Flip Kit with Lifting Hanger & Shackles
Details
- DJM2507-24
- DJM2507-24
- DJM Suspension
- New
Categories
Shipping Information
- Item Requires Shipping
- 75.0 lbs.
- W12.0000” x H12.0000” x L36.0000”
- Free Ground Shipping | Exclusions Apply*