DJM2045L-55-1-ROTOR | DJM Suspension 5 Inch Front / 5 Inch Rear Lowering Kit (1973-1987 C10 Pickup 2WD with 1.0 Inch Rotors)

1973-1987 C10 5 inch Front / 5 inch Rear Lowering Kit (1 inch Rotor)

This kit is designed to work with a 1 inch thick rotor.only.  If you have a 1.25 inch rotor use (DJM2045H-5/5).

A combination of a 3 inch lowering spindle and 2 inch lowering coils drop the front 5 inches.

The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” required on your C-10 because there is plenty of suspension travel, even after lowering it 5 inches.

Note: If your original rear u-bolts need replacing use kit.  DJM2045L-5/5 LTD which includes new U-bolts and leaf spring spring plates.

Drop SpindlesFront Coil SpringsRear Flip Kit

Additional information

1973 - 1987 C10 3" Drop Spindles (1.0" Rotor)

1963 - 1987 C-10 2″Front Lowering Coil Spring

1973-1987 C10 5 inch Rear Axle Flip Kit

13.5″ Loop / Loop SuperShock (1309)

21.5″ Loop/ Loop SuperShock (2100)