Home - Return to Previous Page
Click on image to zoom

69-25150 | ReadyLift 1.5 Inch SST Lift Kit With Control Arms For Ford Expedition Tremor

For 2025-2026 Ford Expedition Tremor

69-25150
Was: $1,039.94
Sale: $883.95
Save: 15%
Save: $155.99
Qty:
Free Ground Shipping | Exclusions Apply*

Description

Developed specifically for the 2025+ Ford Expedition Tremor, the 69-25150 adds 1.5 inches of ride height to the Tremor’s already elevated factory suspension, creating additional clearance for larger tires.

  • Includes ReadyLIFT upper control arms and front/rear lift spacers
  • Fits up to 295/60R20 tires on 20x9 +20 wheels

Tire Fitment

295/60R20 on 20x9 +20 Wheels 

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle's systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.

DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

Application List

2025-2026 Ford Expedition tremor

Components

HEADLIGHT LEVEL SENSOR BRACKET KIT

ADJUSTER CAM NUT x 4

ADJUSTER PLATE x 4

FRD TRMR FRNT STRUT SPACER x 2

3/8 REAR STRUT SPACER FRD EXPDTN TRMR x 2

F-150 UPPER CONTROL ARM KIT RIGHT

F-150 UPPER CONTROL ARM KIT LEFT

Tires & Wheels

Fits up to 295/60R20 tires on 20x9 +20 wheels

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 24.0 lbs.
  • W12.0000” x H6.0000” x L16.0000”
  • Free Ground Shipping | Exclusions Apply*

Documents