TF-RAFTB-18MM | Thuren Fabrication Front Track Bar For Ram 2500 4x4 / Ram Power Wagon / Ram 3500 4x4

Fitment:

• Does not function with larger aftermarket diff covers!!

Details:

• First place to start if your vehicle has any strange handling traits.
• Made from 1.50" x 3/8" wall 1026 DOM tube.
• Delrin machined frame side bushing.
• CNC machined form threaded Heim joint tube end.
• Bead blast textured, then highest quality Powder Coated.
• Ready to install out of the box*
• Grease Zerk Fitting equipped frame side bushing.
• Extreme duty FK Teflon lined rod end at axle side.

     You may hear claims that a rigid Track Bar causes steering vibration, but that simply is not true. Our Trackbar is engineered to be as rigid as possible, because the Track Bar serves as the primary support for the steering system. Any deflection in that support will directly reduce steering precision and performance. In contrast, the factory OEM Track Bar uses rubber bushings which, by nature, allows deflection!

     *We ship Track Bars for the 2013+ model years ready to install. The Heim joint jam nut is pre-set, and tightened, to function with 1" to 3" of front lift. If your truck is at stock height, the track bar will still function at this setting, but it will be slightly long. If you want to match the length of your OEM Trackbar, you will want to purchase our Crowfoot Wrench to help you make that adjustment, as the Jam Nut is very tight out of the box.