TF-FTRARM-1322 | Thuren Fabrication Alien Radius Arms For Ram 2500 / Ram 3500

Fitment:

• Fits 2013-2026 Ram 3500 SRW and DRW
• Fits stock height unmodified trucks through lifts up to 3.5" height

Details:

• Easy 3 bolt installation per side
• Constructed from laser cut 3/16" steel, with 3 layers of added internal gusseting.
• Turning clearance maintained with 37x12.5 tires on factory +57mm offset wheels with zero rub at full steering lock*
• Turning clearance maintained with 40x13.5 tires on +18mm offset wheels with zero rub   at full steering lock*
• Uses proven OEM rubber rear pivot bushings
• Multiple hole mounting positions for limiting-straps, if needed
• Maintains factory OEM alignment and axle placement geometry, so they function great from 0-3.5" of lift
• Does fit the 2014-2026 Power Wagon, but be sure to read the below notes.

*You will need the Thuren High Clearance Sway Bar (TF-FSWBK-13UHC-AL), and you must replace/modify/trim your fender and liner/rocker seam, to take full advantage of a larger tire size and new turning radius ability.

NOTE: Plan on about 2-3 weeks to ship. If you are in a hurry, check in with us before ordering.

Power Wagon fitment details: This arm fits the Power Wagon perfectly, but you will loose some articulation with the Swaybar disconnected. You will gain some better road manners with our arm, and gain similar turning radius advantages, but only if your OEM Radius Arms are the first point of tire contact. The second point of contact will still be the OEM swaybar, so the turning radius gains will not be identical to the 2500/3500 regardless, so long as the OEM swaybar is retained. Naturally, our arm is much stronger than the OEM Power Wagon radius arm.