TF-FBMPR-1318-W | Thuren Fabrication Modular Front Winch Bumper For Ram 2500 / Ram 3500 | For OEM Unmodified Fenders

Details:

• Shipped raw steel, ready for paint or coating.
• If you have park sensors, those must be disconnected.
• Our 3 piece modular design, lets the bumper ship normal UPS ground, in 2 large boxes.
• Even using .187" thick steel, it only adds 45 lbs to the weight of the truck
• Outer bolt on wings are boxed on the backside for ultimate strength.
• Integrated tow/recovery shackle mounts are BOMB PROOF.
• High clearance design for off-road function.
• Frame mount fully clamps each rail, so the bumper will never shift.
• Includes 7/8"(1" dia pin) shackle.

IMPORTANT INFO:

**If you are ordering this bumper for a 2013 2500, you must confirm your intercooler mounts are not the later style 14+ which is 4" lower, as shown in the last 2 pictures. If they are, you must order a bumper for a 14+ 2500. Its come to our attention that some mid to late 2013 Ram 2500s use the 14+ intercooler while still retaining a front 4-link suspension design. If you have the shorter 2010-2013 2500 Intercooler the 2014+ bumper will fit, but it will hang down much lower for no reason, which is undesirable.