Home - Return to Previous Page
Additional Images

CS-FLVL-SIG-23 | Carli Suspension 3.5" Lift Signature System For Ford F-250/F-350 Super Duty | Diesel

For 2023-2026 Ford F-250/F-350 Super Duty | Diesel

CS-FLVL-SIG-23
Pricing: $2,982.18

Customize Your Item

- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
Qty:
Free Ground Shipping | Exclusions Apply*

Description

The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The included, front, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts, we back them with a limited lifetime warranty to ensure their quality is as unbeatable as their ride quality at this price point.

  • Carli Signature Series Shocks are Carli tuned and corrosion resistant to provide a durable and comfortable ride.
  • System includes front and rear shock package, radius arm drops, linear rate coil springs, brake line kit, bump drops, and caster correction shims.
  • Carli Signature Series shocks carry a limited lifetime warranty so you can upgrade without worry.
  • Increases wheel travel to 9" front and 13" rear.

Disclaimer: This system will not achieve a proper rear high stance without the installation of the add-a-pack; it will sit slightly rear low with no rear option added!  The F250 Add-a-Pack equipped systems are a nice improvement over stock; the F350 with the Add-a-Pack is still very stiff in the rear as the main pack doesn’t move much unless loaded. For this reason, we do not recommend the Add-a-pack on an F350 or Tremor (as they all have F350 springs)

Wheel and Tire: Factory Wheels SHOULD NOT be run with oversized tires. They’re known to rub the radius arm, sway bar and most concerning – Brake Lines. Factory tires and factory wheels will work without issue but we DO NOT recommend running oversized tires on factory wheels. On our 3.5” Ford Systems, we recommend 17”-18” wheels, no more than 9” wide with 5.5” of backspacing with Carli Fabricated Radius Arms or 5” Backspace with factory arms; 5” will require a bit more trimming. Tires, 37×12.5” will fit with some trimming; 35” will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

Customization Information

Sway Bar Option

*REQUIRED* - The Leveling System will ride best with the Torsion Sway Bar. Maintaining the factory sway bar through use of the Sway Bar Drops or Extended Link Kit is only recommended for customers with snow-plows, in-bed campers or who are constantly hauling to the capacity of the truck.

17-26 FORD F250/350 4X4 STOCK SWAY BAR FRAME DROP BRACKET - 2.5"/3.5" LIFT

SKU: CS-FSBD-LVL-1723
- Corrects Sway Bar Geometry in Carli Leveling Suspensions

20-26 FORD F250/350 4X4 EXTENDED SWAY BAR END LINK & SWAY BAR DROP BRACKET KIT - 3.5"

SKU: CS-FELKIT-LVL-20
- Combines End Links and Drop Brackets For Perfect Sway Bar Position
- Extended Length to accommodate Leveled Trucks
- 17-4 Stainless Steel, Greaseable and Fully Rebuildable
- Excellent Articulation
- Compatible with 2.5″ & 3.5″ Suspension Systems

17-26 FORD F250/350 4X4 TORSION SWAY BAR KIT 2.5"/3.5" LIFT WITH END LINKS

SKU: CS-FTSB-LVL-17
- Direct Fitment to Carli Leveling Lifts
- Replaces Immobile Factory Sway Bar with Custom Torsion Bar
- Huge Ride Quality Improvement
- Includes CS-FEL-LVL-17 Drop Brackets and Sway Bar Links

Matching Rear Shocks

*OPTIONAL* - Tuned to the factory leaf springs, these rear shocks balance the rear-feel to match the custom tune in your newly leveled Super Duty.

05-26 FORD F250/350 4X4 CARLI SIG SERIES 2.0" IFP 2.5" LIFT REAR SHOCK PKG

 SKU: CS-FSIG20SPKG-REAR-LVL-05
- 2.0" Carli Signature Series Shocks, Rear Pair
- Carli Custom Tuned
- Clear Coated Bodies for Corrosion Resistance
- Boots Included for Shaft Protection
- 12" Rear Wheel Travel
- Fitment: 2005-23 F250/350 4x4 with 0-2" Rear Lift

Adjustable Track Bar

*OPTIONAL* - Centers the axle at the new ride height utilizing a stronger suspension/steering link to prevent death-wobble and improve overall tracking and steering feel.

17-26 FORD F250/350 4X4 ADJUSTABLE TRACK BAR 2.5"/3.5" & 4.5"/5.5" LIFT

SKU: CS-FATB-17
- Massive Steering Upgrade
- Vibration Damping CUB Joint
- Fully Rebuildable
- 2017-19 Configurable to Carli 2.5"-4.5" Lifts
- 2020-24 Configurable to Carli 3.5"-5.5" Lifts
- NOT for use on stock-height Trucks.

Rear Leaf Spring Option

*OPTIONAL* - The Leveling System does not require a rear spring option. See the disclaimer above for more information.

Add-a-Packs are NOT recommended for the F350 (or any F250 equipped with the High Capacity Tow or Tremor Package).

17-26 FORD F250/350 4X4 PROGRESSIVE ADD-A-PACK - 1" LIFT

SKU: CS-FPAP-LVL-17
- Built in the U.S.A. By Deaver Leaf Spring
- Smooth, Progressive Design
- Supplied with Bump Stop Drops, U-bolts and hardware
- Pairs to Carli Leveling Lifts, provides 1/2"-1" high rear stance
- Eliminates the Factory Block
- Load capacity is maintained, ride quality is improved

Leaf Spring Shackle

*OPTIONAL* -Much of the jarring ride of the Super Duty rear can be attributed to the factory vulcanized bushings in the leaf spring pack and shackle. The factory shackle is very strong BUT the design is not conducive to a smooth ride. The Carli shackle is constructed of 1/4″ American cold-rolled steel. The mid-length gusset ensures no deflection while the serviceable bushings offer a far superior ride to the bind of the factory bushings.

05-26 FORD F250/350 4X4 FABRICATED LEAF SPRING SHACKLE

SKU: CS-FSHACKLE-11
- Greasable and Rebuildable
- Far Better Ride than Factory Shackle
- 1/4" Steel Construction
- Fits Factory and Carli Springs

2° Pinion Shim

*OPTIONAL BUT RECOMMENDED* When modifying the rear leaf springs (add-a-pack or Full Spring Pack) of the 2017+ Super Duty platform, there's a small chance you'll induce a driveline vibration around 70mph when under power from the rear driveline. These pinion shims will correct the angle to 4°-5°, ideal for our lifted applications. Although these will not be "required" on every truck, we've found the 4°-5° spec to be superior in our applications and these are FAR easier to install initially than correctively.

05-26 FORD F250/350 4X4 FORD PINION SHIM KIT, 2 DEGREE

SKU: CS-FPSKIT-3X2
- 2° Pinion Shim Kit
- Includes new Center Pin

Adjustable Radius Arms

*OPTIONAL* - Icing on the cake, these arms have been completely redesigned for the 23+ Super Duty. They boast Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Constructions, Serviceable 17-4 Stainless Spherical Bearings and Adjustable Caster Correction up to 3.5° over stock specs to leave Death-Wobble in the rear-view.

23-26 FORD F250/350 4X4 FABRICATED RADIUS ARMS - 3.5" LIFT

SKU: CS-FARA-LVL-23
- 0.5°-2.5° of adjustable Caster correction
- 3/16 Construction, Full Length Internal Structure
- 12" Limit Straps Kit Included
- 17-4 Stainless Spherical Joint for longevity and bind free Cycling

Low Mount Steering Stabilizer

*OPTIONAL* - Bolt in steering stabilizer which compliments a Carli, or factory, high mount stabilizer. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.

23-26 FORD F250/350 4X4 LOW MOUNTSTEERING STABILIZER KIT - WITH DIFFERENTIAL GUARD

SKU: CS-FLMSS-23
- Custom Valved for Larger Tires, Adjustable Nitrogen Pressure
- Includes Differential Guard and Clamp
- Combines with High-Mount Stabilizer for Opposing Setup

Light Bar

*OPTIONAL* - The Carli Fabricated Light Bar features heavy-duty DOM steel construction, billet aluminum end caps, and compatibility with Baja Designs LP Series lights or a 40" ONX6 Arc Light Bar. Utilizing factory bumper mounting locations with no visible hardware, it provides a clean, integrated appearance while adding substantial off-road lighting capability. Lights sold separately.

17-26 FORD F250/350 4X4 FABRICATED LIGHT BAR

SKU: CS-FLB-17
- 0.120" Wall DOM Main
- Internally Gusseted, Boxed, Fabricated Horns
- Precision Fit Utilizing 4 Bumper Bolts
- Hidden Mounting Hardware = Better Aesthetic & Security
- 6061 Billet End Caps
- Accommodates Several Baja Designs Lighting Configurations
- Lights NOT INCLUDED
- Fitment: 2017-2026 Ford F250/F350

High Mount Steering Stabilizer

*OPTIONAL* - Bolt in replacement for the factory stabilizer. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains.

17-26 FORD F250/350 4X4 HIGH MOUNT STEERING STABILIZER - STAINLESS STEEL - 2.5" & 4.5" LIFT

SKU: CS-FHMSS-17
- Long Lasting Performance and Appearance
- Bolt in Replacement for OEM Stabilizer
- Works on leveled and lifted trucks ONLY
- Not Compatible with Drop Pitman Arms
- Counters the right-hand pull inherent to tires like Toyo Mud Terrains.

Application List

2023-2026 Ford F-350 Super Duty
2023-2026 Ford F-250 Super Duty

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 124.0 lbs.
  • W14.0000” x H8.0000” x L28.0000”
  • Free Ground Shipping | Exclusions Apply*