Home - Return to Previous Page
Additional Images

CS-FLVL-EV25-23 | Carli Suspension 3.5" Lift E-Venture System For Ford F-250/F-350 Super Duty | Diesel

For 2023-2026 Ford F-250/F-350 Super Duty | Diesel

CS-FLVL-EV25-23
Pricing: $10,561.14

Customize Your Item

- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
- Select Your Options -
 * required
Qty:
Free Ground Shipping | Exclusions Apply*

Description

Carli E-Venture Suspension Systems represent the pinnacle of intelligent suspension technology, both on-road and off-road. Gathering data input via an engine mounted sensor and factory sensors via the OBDII port, the E-Venture’s in-cab computer processes information through Carli's proprietary algorithm, allowing the shocks to react to the terrain 250 times per second, ensuring optimized ride and handling on tarmac or trail. E-Venture shocks feature multiple performance modes, allowing you to customize your ride according to your preferences.

Soften the shocks for smooth highway cruising or stiffen them up for rugged trail adventures. Additionally, this advanced system enables users to adjust pitch, roll, brake, throttle, and steering response, tailoring performance precisely to the user’s needs. Even when your truck is fully loaded, the E-Venture system offers a dedicated hauling feature with various adjustments to maintain control and stability. You can expect more control, improved bottom-out resistance without compromise, a more commanding view of the road, improved off-road performance, and a stylish aggressive look.

  • Select from Mountain, Street, and Desert mode to choose the best setting for any terrain. Each setting has been EXTENSIVELY refined and can be activated instantaneously with the push of a button.
  • Pro Mode allows users to adjust the Pitch, Roll, Brake, Throttle and Steering Response. Don’t worry, if your curiosity gets ahead of you or you failed to track your changes, we’ve implemented a “Restore Default” setting.
  • Rear Load Adjustment feature gives the user control over the rear dampers. When loaded, the rear can be adjusted to balance comfort and support OR max the rear support to prioritize load support.
  • System includes front and rear shock package, linear rate coil springs, brake line kit, bump stop drops, caster correction shims and adjustable track bar.
  • Increases wheel travel to 9" front and 13" rear.

Customization Information

2025 Platinum Touch Screen Mount - Suede A-Pillar

*OPTIONAL*

In 2025, Ford introduced a new Suede A-Pillar into the higher trims. We've only seen it in the platinum so far, but it may exist elsewhere. We worked with SDI to produce a new touch screen mount to work with this specific pillar. Click on the pictures to find out if your truck will require this mount.

25 FORD SUPER DUTY PLATINUM E-VENTURE TOUCH SCREEN MOUNT - SUEDE A-PILLAR

SKU: CS-FEV-APTSM-25-P
In 2025, some Platinum Super Duties are equipped with a suede A-Pillar requiring a different mounting provision than what's included with the E-Venture system. Below shows two angles of this suede A-Pillar requiring this mount.

Long Bed Extension Harness

*OPTIONAL*

24" Rear Shock Extension Harness for Super-Cab Long Bed and Crew-Cab Long Bed trucks. NOT required on Single Cab Long Bed or Crew Cab Short Bed.

17-25 FORD F250/350 4X4 CARLI EVENTURE LONG BED EXTENTION HARNESS

SKU: CS-FEVSPKG-LBEH
- Fitment: E-Venture Shock Package
- 24" Extension Harness for Rear Shock connections

ONLY Required on:
- Crew Cab Long Bed Trucks: 176" Wheelbase
- Super Crew Long bed: 164" Wheelbase

Sway Bar

*REQUIRED*

The E-Venture System has been optimized for use with the Torsion Sway Bar. This is the recommended option. Selecting anything other than this option will result in non-optimal operation of the system. Maintaining the factory sway bar through use of the Sway Bar Drops or Extended Link Kit is only recommended for customers with snow-plows, in-bed campers or who are constantly hauling to the capacity of the truck.

17-26 FORD F250/350 4X4 STOCK SWAY BAR FRAME DROP BRACKET - 2.5"/3.5" LIFT

SKU: CS-FSBD-LVL-1723
- Corrects Sway Bar Geometry in Carli Leveling Suspensions

20-26 FORD F250/350 4X4 EXTENDED SWAY BAR END LINK & SWAY BAR DROP BRACKET KIT - 3.5"

SKU: CS-FELKIT-LVL-20
- Combines End Links and Drop Brackets For Perfect Sway Bar Position
- Extended Length to accommodate Leveled Trucks
- 17-4 Stainless Steel, Greaseable and Fully Rebuildable
- Excellent Articulation
- Compatible with 2.5″ & 3.5″ Suspension Systems

17-26 FORD F250/350 4X4 TORSION SWAY BAR KIT - 2.5"/3.5" LIFT WITH END LINKS

SKU: CS-FTSB-LVL-17
- Direct Fitment to Carli Leveling Lifts
- Replaces Immobile Factory Sway Bar with Custom Torsion Bar
- Huge Ride Quality Improvement
- Includes CS-FEL-LVL-17 Drop Brackets and Sway Bar Links

 Rear Leaf Spring Option

*REQUIRED*

The EVenture System has been optimized for use with the Full Progressive Leaf Springs. This system is also compatible with the Progressive Add-a-Packs but there will be a notable ride quality difference on and off-road as the rebound tuning is matched to the lighter Carli Leaf Springs (add-a-packs will "bounce" a bit more).

Add-a-Packs are NOT recommended for the F350 (or any F250 equipped with the High Capacity Tow or Tremor Package).

Selecting "NO Rear Leaf Spring Selection" will result in a "floaty" rear end and unknown height as this Carli System is optimized to the Progressive Leaf Springs; NOT the factory leaf springs.

17-26 FORD F250/350 4X4 PROGRESSIVE ADD-A-PACK - 1" LIFT

SKU: CS-FPAP-LVL-17
- Built in the U.S.A. By Deaver Leaf Spring
- Smooth, Progressive Design
- Supplied with Bump Stop Drops, U-bolts and hardware
- Pairs to Carli Leveling Lifts, provides 1/2"-1" high rear stance
- Eliminates the Factory Block
- Load capacity is maintained, ride quality is improved

17-26 FORD F250/350 4X4 FULL PROGRESSIVE LEAF SPRING KIT - 1" LIFT

SKU: CS-FFSP-LVL-17
- Provides a slightly rear high stance to Carli Leveling Suspension Systems
- Reduced Overall Spring Rate to “light 3/4-ton” for a Better Ride
- Increased Progression (Spring Rate)
- Progressive Overload (Factory overload is a hard-stop)
- Dramatically Increased Suspension Travel
- Minimized Friction Throughout the Pack
- Optimized Center Pin Location to Ensure Maximum Tire Fitment
- Includes Serviceable Bushings, New U-Bolts and Rear Bump Stop Drops
- Fitment: 2017-24 Ford F250/350 4x4, Diesel 3.5-4.0" Axle Tube

17-26 FORD F250/350 4X4 HD +1000LBS PROGRESSIVE LEAF SPRING KIT - 1" LIFT

SKU: CS-FFSP-LVL-17-HD
- Block eliminating, Full Progressive Spring Pack
- Heavy Duty Full Replacement Leaf Springs designed for those with constant 1,000lbs in the bed
- Includes new U-Bolts and Rear Bump Stop Drops
- Provides a 1", rear high stance on Matching 2.5" Leveling Suspension Systems
- 37" Tire Fitment
- Fitment: 2017-24 Ford F250/350 4x4, Diesel 3.5-4.0" Axle Tube

17-26 FORD F250/350 4X4 XHD +2000LBS PROGRESSIVE LEAF SPRING KIT - 1" LIFT

SKU: CS-FFSP-LVL-17-XHD
The XHD Full Replacement Leaf Springs designed for those with constant 2,000lbs in the bed. Designed for the pop-up campers like the Four Wheel Campers Hawk. Although, it will work with ANY 2,000lb. constant load. This is NOT a leaf spring pack designed to run unloaded, it requires the 2,000lbs load to sit at the intended height and properly function. Being a far heavier spring rate than our standard leaf spring AND designed to operate with a much higher center of gravity,  we recommend 2.5" Remote Reservoir Shocks & custom shock tuning for optimal control and ride quality. Carli offers options for the Pintop King 2.5" Shocks in both Gas and Diesel XHD Applications.

- Block eliminating, Full Progressive Spring Pack
- Includes new U-Bolts and Rear Bump Stop Drops
- 37" Tire Fitment
- Fitment: 2017-24 Ford F250/350 4x4, Diesel 3.5-4.0" Axle Tube

17-26 FORD F250/350 4X4 XXHD +3500LBS PROGRESSIVE LEAF SPRING KIT - 1" LIFT

SKU: CS-FFSP-LVL-17-XXHD
The XXHD Full Replacement Leaf Springs designed for those with constant 3,500lbs in the bed - designed for CAB-OVER campers; although, they will work with ANY 3,5000lb. constant load. This is NOT a leaf spring pack designed to run unloaded, it requires the 3,500lbs load to sit at the intended height and properly function. Being a far heavier spring rate than our standard leaf spring AND designed to operate with a much higher center of gravity, we recommend 2.5" Remote Reservoir Shocks & custom shock tuning for optimal control and ride quality. Carli offers options for the Pintop King 2.5" Shocks in both Gas and Diesel XXHD Applications.

- Block eliminating, Full Progressive Spring Pack
- Includes new U-Bolts and Rear Bump Stop Drops
- 37" Tire Fitment
- Fitment: 2017-24 Ford F250/350 4x4, Diesel 3.5-4.0" Axle Tube

Leaf Spring Shackle

*OPTIONAL*

Much of the jarring ride of the Super Duty rear can be attributed to the factory vulcanized bushings in the leaf spring pack and shackle. The factory shackle is very strong BUT the design is not conducive to a smooth ride. The Carli shackle is constructed of 1/4″ American cold-rolled steel. The mid-length gusset ensures no deflection while the serviceable bushings offer a far superior ride to the bind of the factory bushings.

05-23 FORD F350/350 4X4 FABRICATED LEAF SPRING SHACKLE

SKU: CS-FSHACKLE-11
- Greasable and Rebuildable
- Far Better Ride than Factory Shackle
- 1/4" Steel Construction
- Fits Factory and Carli Springs

2° Pinion Shim

*OPTIONAL BUT RECOMMENDED* When modifying the rear leaf springs (add-a-pack or Full Spring Pack) of the 2017+ Super Duty platform, there's a small chance you'll induce a driveline vibration around 70mph when under power from the rear driveline. These pinion shims will correct the angle to 4°-5°, ideal for our lifted applications. Although these will not be "required" on every truck, we've found the 4°-5° spec to be superior in our applications and these are FAR easier to install initially than correctively.

05-26 FORD F250/350 4X4 FORD PINION SHIM KIT, 2 DEGREE

SKU: CS-FPSKIT-3X2
- 2° Pinion Shim Kit
- Includes new Center Pin

Adjustable Radius Arms

*OPTIONAL* - Icing on the cake, these arms have been completely redesigned for the 23+ Super Duty. They boast Limit Strap Protection for your Front Shocks, 1/4" Boxed Steel Constructions, Serviceable 17-4 Stainless Spherical Bearings and Adjustable Caster Correction up to 3.5° over stock specs to leave Death-Wobble in the rear-view.

23-26 FORD F250/350 4X4 FABRICATED RADIUS ARMS - 3.5" LIFT

SKU: CS-FARA-LVL-23
- 0.5°-2.5° of adjustable Caster correction
- 3/16 Construction, Full Length Internal Structure
- 12" Limit Straps Kit Included
- 17-4 Stainless Spherical Joint for longevity and bind free Cycling

Low Mount Steering Stabilizer

*OPTIONAL* - Bolt in steering stabilizer which compliments a Carli, or factory, high mount stabilizer. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the left-hand pull inherent to tires like Nitto Trail Grapplers. Run in conjunction with the Carli High Mount for the ultimate Dual, Opposing Steering Stabilizer combination that's infinitely adjustable.

23-26 FORD F250/350 4X4 LOW MOUNT STEERING STABILIZER KIT - WITH DIFFERENTIAL GUARD

SKU: CS-FLMSS-23
- Custom Valved for Larger Tires, Adjustable Nitrogen Pressure
- Includes Differential Guard and Clamp
- Combines with High-Mount Stabilizer for Opposing Setup

High Mount Steering Stabilizer

*OPTIONAL* - Bolt in replacement for the factory stabilizer. Adjustable from 70-200 psi to run neutral (no directional influence at 70psi) or at 200psi to counter the right-hand pull inherent to tires like Toyo Mud Terrains.

17-26 FORD F250/350 4X4 HIGH MOUNT STEERING STABILIZER - STAINLESS STEEL - 2.5" & 4.5" LIFT

SKU: CS-FHMSS-17
- Long Lasting Performance and Appearance
- Bolt in Replacement for OEM Stabilizer
- Works on leveled and lifted trucks ONLY
- Not Compatible with Drop Pitman Arms
- Counters the right-hand pull inherent to tires like Toyo Mud Terrains.

Light Bar

*OPTIONAL* - The Carli Fabricated Light Bar features heavy-duty DOM steel construction, billet aluminum end caps, and compatibility with Baja Designs LP Series lights or a 40" ONX6 Arc Light Bar. Utilizing factory bumper mounting locations with no visible hardware, it provides a clean, integrated appearance while adding substantial off-road lighting capability. Lights sold separately.

17-26 FORD F250/350 4X4 FABRICATED LIGHT BAR

SKU: CS-FLB-17
- 0.120" Wall DOM Main
- Internally Gusseted, Boxed, Fabricated Horns
- Precision Fit Utilizing 4 Bumper Bolts
- Hidden Mounting Hardware = Better Aesthetic & Security
- 6061 Billet End Caps
- Accommodates Several Baja Designs Lighting Configurations
- Lights NOT INCLUDED
- Fitment: 2017-2026 Ford F250/F350

Trophy Hitch

*OPTIONAL* - Get your over-sized spare out of your bed - crank it into the factory location and secure it with our 3-way tie-down with the Carli Trophy hitch. Boasting 16,000lbs. of capacity via the 3" hitch receiver, direct bolt in installation, and up to a 38" spare tire in the factory location!

17-26 FORD F250/350 4X4 FORD TROPHY HITCH

SKU: CS-FHITCH-1723
- Direct Bolt in, Rated to 16,000lbs., 3" Hitch Receiver
- 3/16" and 1/4" Cold-Rolled American Steel
- Utilizes Factory Winch + 3-way Tie-Down to Secure Spare
- 38" Spare Tire in the Factory Location
- May Require Exhaust Modification
- Requires 5/8" x 4" (usable shank) Hitch Pin

Application List

2023-2026 Ford F-350 Super Duty
2023-2026 Ford F-250 Super Duty

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 149.0 lbs.
  • W16.0000” x H8.0000” x L42.0000”
  • Free Ground Shipping | Exclusions Apply*