47-6700 | ReadyLift Castor Correction Brackets (2007-2018 Wrangler JK)

2007-2018 Jeep JK Wrangler Caster Correction Brackets Made for use with your factory upper/lower control arms.
Reduces the overall angle of your control arms in lifted applications.
Primarily designed for use on 4 inch lift situations but suitable for 2.5" - 4" of lift.
Provides caster correction that greatly improves overall handling and driving performance.

Due to popular demand by Jeep customers, ReadyLIFT is proud to announce that we are now offering front suspension control arm Geometry Correction Brackets (aka caster correction brackets) for 2007-2018 Jeep JK vehicles. The new 47-6700 bracket kit is available for Jeep JK vehicles with a lift height of 2.5 to 4 inches of lift. These brackets are engineered to reduce control arm angles while correcting caster changes that occur on many JKs when a lift kit is stuffed into the suspension. The straight axle control arm design of the JK doesn't allow for correcting the front axle caster. These new brackets easily bolt into the frame and have two mounting hole options depending on the amount of lift the vehicle has. The single greatest benefit to including a set of ReadyLIFT caster correction brackets with your lifted Jeep JK build is the very noticeable improvement in driving attitude and handling. The ReadyLIFT 47-6700 Geometry Correction Bracket kit includes (2) heavy-duty CNC-bent and robot welded bolt in frame brackets with new hardware. The ReadyLIFT 47-6700 Geometry Correction Bracket kit includes (2) heavy-duty CNC-bent and robot welded bolt in frame brackets with new hardware.
Made for use with your factory upper/lower control arms.
Reduces the overall angle of your control arms in lifted applications.
Primarily designed for use on 4 inch lift situations but suitable for 2.5" - 4" of lift.
Provides caster correction that greatly improves overall handling and driving performance.

Tire Size Note:
ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

The ReadyLIFT 47-6700 Geometry Correction Bracket kit includes (2) heavy-duty CNC-bent and robot welded bolt in frame brackets with new hardware.

SAEJ2492 Warning:
By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

DO IT YOURSELF:
Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.

Estimated Installation Time: 1.3 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

HAVE A CERTIFIED MECHANIC DO IT FOR YOU!