7071-LM | Stage 2.3 System (2015-2022 Sprinter 2500 4WD | Under 8500 LBS)

Few upgrades are as critical to a vehicle as a tuned suspension package. Adventure in comfort and confidence with a Van Compass system tuned for your van and needs. The Stage 2.3 system utilizes front and rear adjustable piggy back 3.3 Fast Adjust shocks paired with a front Sumo Spring bump stop upgrade for owners that want to minimize sway and gain additional control over their suspensions feel and driving dynamic. This system is intended for lighter weight adventure vans that do not need a rear spring rate upgrade, and vans where the owner do not want any change in ride height.

Our Stage 2.3 system retains the factory suspension geometry and transforms the Mercedes Sprinter 4x4 from a violently swaying and lumbering cargo van into a vehicle with true German luxury car feeling and control, both on and offroad. Vehicle control and suspension compliance are the two areas of ride quality we focused on when we engineered this kit, and the payoff is increased performance over any terrain while also improving handling for unexpected emergencies.

Falcon's 3.3 Fast Adjust Piggyback Reservoir Shocks represent the cornerstone of our Stage 2.3 system. Built specifically to our tune specifications, they represent the culmination of years of accumulated knowledge, applied directly to the adventure van market. These shocks have a MASSIVE range of compression adjustment at the simple flip of a knob. We've put the large red knob in an easy to reach location that allows for easy access and quick confirmation of the settings. The rear shocks also include the SP2 adjustment, which allows for further refinement specific to your preferences and vehicle's weight; with a simple turn of the shaft one of 2 tune profiles is engaged during installation. For more info on the functions of these shocks, you can read our 3.3 shock settings guide.

Included Components
Falcon 3.3 Fast Adjust Front Shocks with Mounting Brackets
Front Sumo Springs
Falcon 3.3 Fast Adjust Rear Shocks with SP2
Dust boots for all 4 shocks.
All necessary hardware and instructions for a simple installation

NOTE: 2019+ Vans with rear HD A/C will need additional care routing the lines around the shocks and bracketry. The lines may need to be gently bent by hand, and secured with a cushion clamp to prevent chafing.

NOTE: The Falcon rear shocks are NOT compatible with Sumo Spring Rebel series of springs, specifically Sumo Spring part numbers: SSR-327-47-2 and SSR-327-40-2. There is a Sumo Spring bracket associated with those kits which makes contact with the large shock body of the Falcon shocks.

To determine the actual weight of your vehicle, go to your local landfill to utilize their scale.

Recommended Shop Labor Time: 5 Hours