52456 | McGaughys 7 to 9 Inch Lift Kit 2020-2023 GM Truck 2500

7″-9″ Premium Lift kit Lift kit comes powder-coated gloss black
Comes with stainless steel inserts for front crossmember & compression struts

Kit Includes:
(2) Spindles
(2) Lift Blocks w/ U-bolts & Hardware
(1) Front Crossmember
(1) Rear Crossmember
(1) Skid Plate
(2) Sway Bar End Links
(2) Compression Struts
(2) Lower A-frame Support Rods
(2) Torsion Bar Drops
(1) Differential Drop
(1) CV Axle Spacer
(1) Weld-in Filler Plate
(4) Front & Rear Bump Stops
(1) Brake Cable Extender
(1) Rear Brake Bracket Extender
(2) Rear Compression Strut Retainer Brackets
(2) Front Brake Line Bracket Extenders
(2) Upper Shock Mounts w/ Hardware
(2) Front Shocks
(2) Rear Shocks

Fitment
2020-2023 GM 2500 Trucks 2WD/4WD Gas & Diesel Models
*Fits AT4 models as well*

Optional Add-Ons
MS52414 Upper Control Arms (not included with kit)
MS52418 Traction Bars (not included with kit)
MS52410 Torsion Keys (not included with kit)
MS52361 Rear Lift Shims (not included with kit)
MS1102 Upgraded Front Reservoir Shocks (not included with kit)
MS1103 Upgraded Rear Reservoir Shocks (not included with kit)
MS52357 Front Reservoir Shock mounts (not included with kit)
MS51052 Billet Ball Joint Cap for Upgraded Upper Control Arms (not included with kit)
MS51041 Billet Face Plate for Front Crossmember (Black) (not included with kit)
MS51043 Billet Face Plate for Front Crossmember (RAW) (not included with kit)
MS51441 Billet Face Plates for Compression Struts (Black) (not included with kit)
MS51443 Billet Face Plates for Compression Struts (RAW) (not included with kit)
MS51341 Billet Face Plates for Traction Bars (Black) (not included with kit)
MS51343 Billet Face Plates for Traction Bars (RAW) (not included with kit)

Replacement Parts
MS2600 Front Shock
MS3250 Rear Shock

Notes:
PLEASE NOTE: If you are installing the optional rear shims and rear traction bars, you may need to get longer u-bolts than what come with the kit. This is most common on 3500 trucks when installing all the rear shims along with rear traction bars.

This kit can be adjusted to 8″ or 9″. You will need Torsion Keys #52410 (sold separately), to raise up the front. You will also need the Rear Lift Shim Kit #52361 (sold separately), to raise the rear up.

If running this kit at the 9″ position, we highly recommend using Upper Control Arms #52414 (sold separately) to help with bump stop clearance issues.