DS2056-2 | 2 Inch Drop Spindles

1988 – 1998 Chevy C1500's (Except 88-91 Standard Cab) 2" Drop Spindles by DJM
DJM drop spindles

This is a 2? drop spindle designed specifically for the 92 – 98 Chevy C1500. To be specific this spindle has a spud (axle) length of 4.5" and requires the inner wheel bearing outer diameter to be 1.375". This is different from 88-91 C1500 Standard Cabs which use part # DS2055-2!

Now, if this is the right part, great you have a spindle that will give you a 2" drop right out of the box and more if you add a coil spring! Be advised, drop spindles have a problem sometimes with wheel clearance! In particular, for all drop spindles built for the 88 – 98 C1500's using the factory 15" wheel (or any 15" wheel) you have to modify the factory lower control arm to eliminate a wheel contact problem when you turn. What happens is the 15" wheel will contact the factory lower control arm when you make a tight turn (think parking lot). You can grind a small amount of relief in the factory control arm to eliminate this pesky issue!


This spindle only works on all 88-98 C1500 Trucks (Except 88-91 Standard Cabs)! If you have a 88-91 Standard Cab use this part DS2055-2