2011 GMC K2500HD 4WD 6 Inch RTS System with Performance Shocks
- 1 FTS21092 Component Box 1
- 1 FTS21093 Component Box 2
- 1 FTS21094 Component Box 3
- 2 FTS7338 Performance Front Shocks
- 2 FTS7333 Performance Rear Shocks
Use 35/13.50R18 tires w/ 18x9 wheels w/ 5 3/4” BS w/ minor trimming
Use 35/13.50R20 tires w/ 20x10 wheels w/ 5 3/4” BS w/ minor
trimming
Fabtech’s cutting edge RTS™ system has now been developed for the all new
2011 GM HD platform. The 6” RTS™ utilizes a patent pending bracket system that
keep the torsion bars raised up, in the stock location. This feature provides
superior ground clearance at the frame as there are no torsion bars hanging down
to become high centered on or damaged when offroading.
The 6” RTS™ system has been designed with unitized bracketry to retain the
four front compression stops of the vehicle as GM intended. This distributes
impact loads across a wide section of the frame rather than at a single
point.
High arched crossmembers and front differential skid plate are constructed of
1/4” thick steel to resist bending from hard front suspension impacts. Only 1/4”
thick steel provides the rigidity and strength necessary to relocate the torsion
bars, bump stops and lower control arms properly.
Minimal heavy duty bracketry allow for a fast installation time with only two
holes to drill and no cutting of the front diff housing. The 6” RTS™ system
allows the use of both 18” and 20” diameter wheels.
Fabtech leads the industry with this new 6” RTS™ system for superior
functionality both on and offroad for the 2011 GM HD.
