2010 Chevy Camaro System
Billy Boat Performance Exhaust has been setting the pace for high
performance stainless steel exhaust systems for 20 years now. B&B
applies its deep racing heritage to craft one of the finest exhaust
systems available. Continuing in that tradition B&B has recently
introduced a line of exhaust systems for the new 2010 Chevy Camaro.
CNC mandrel bent T304 stainless steel tubing is used throughout the
entire system for a precise fit. The V8 is a full 3” system and is
available in a classic and sport version while the V6 is a 2.5” system
and is only available in the classic version. Both the V8 and V6 systems
use a hand fabricated x-pipe that helps balance the exhaust pulses for
better scavenging and a cleaner exhaust note.
B&B has designed a muffler specifically for the Camaro using
their proprietary Purge Resonance Technology or PRT. Hand fabricated out
of T304 stainless steel the muffler offers increased exhaust flow and
emits a nice deep muscle car bark at idle, acceleration and cruising
speeds while all but eliminating the unwanted in-cabin, low frequency
resonation. Performance increases of 10hp and 11ft/lbs on the V8 and 5hp
and 5ft/lbs on the V6 were seen on their in house chassis dyno with the
mufflers only.
For aesthetics Billy Boat Performance Exhaust incorporated their
popular round double wall tips with a 4.50” on the V8 and a 4” on the V6
to give the Camaro a mean yet distinguishing look missing from the
factory. The mufflers and tips are fully polished to a mirror like
finish and as with all Billy Boat Performance Exhaust systems it is
backed with a limited LIFETIME warranty.
Classic vs. Sport Exhaust for Your Camaro
The Classic exhaust system was the first system from the design team at Billy Boat Performance exhaust. With factory headers and factory catalytic convertors, many customers were asking for a system with more volume. The sport system was born, and is a great choice for customers planning just a cat-back installation. When we installed the long tube header and the hi-flow cat pipes, we find the larger muffler on the Classic system give the exhaust note a deeper, richer tone and would recommend the Classic for a complete system.
The Benefits of the new Exhaust for the 2010 Chevy Camaro
Billy Boat Performance Exhaust line of performance exhaust for the
2010 Chevy Camaro incorporates the latest in resonance control
technology, B&B’s proprietary Purge Resonance Technology or PRT as
it is known. Completely reengineered the PRT system allows you to have a
mild exhaust note at cruising speeds yet a forceful note on aggressive
driving. The complex yet simple design gives you the increased sound and
performance you are looking for with its straight through design on
moderate to hard acceleration and then the unique purge chambers cancel
out the unwanted interior noise during low rpm cruising speeds. The
mufflers use 3" tubing for maximum flow throughout the system.
2010 Camaro Exhaust System Features
* CNC mandrel bent T304 stainless steel tubing throughout entire system
* Hand fabricated T304 stainless mufflers incorporating B&B’s Purge Resonance Technology (PRT)
* V8 is a full 3" system, while the V6 is a 2.5" system
* Mufflers are available in a new "satin" finish or polished
* Tips are available in the new "SATIN BlACK" finish
* Performance increases of 30HP and 28Ft-Lbs with headers & Classics system
* Performance increases of over 43 HP and 42Ft-Lbs with a tune
* Straight forward installation, no welding required, includes all mounting hardware
* Limited LIFETIME warranty
Headers for the 2010 Camaro
B&B applies its deep racing heritage to craft one of the finest
headers available. Continuing in that tradition B&B has recently
introduced a long tube header that couple to their cat back system with a
set of high flow cat pipes for the new 2010 Chevy Camaro. Every
B&B Camaro header is manufactured using only the highest grade T304
stainless steel materials. The 16ga, 1-3/4” tubing is CNC mandrel bent
while the flanges are cut on one of two in house water jets from 3/8”
thick stainless plate. Each header is then hand fabricated and tig
welded in sturdy fixtures for a perfect fit every time. B&B also
offers a set of high flow cat pipes that will couple the headers
directly to the B&B cat back system. These cat pipes use 200 cell
high flow metal catalyst. Increases in both horsepower and torque will
be seen with this package.
