C6 Total Performance
Billy Boat Performance Exhaust, the manufacturer of complete
automotive exhaust assemblies, is the worlds' source for C6 Corvette
Total Performance Packages.
Total Performance begins with Route 66 or the new PRT Mufflers, or
the most aggressive performance exhaust to be released, the Bullet. It
is complete by adding a pair of Hi Flow Air Filters to the C6, providing
a level of protection without sacrificing air flow.
Get all of Stage 1 plus Long Tube Headers and a synchronized
crossover pipe with Hi Flow Catalytic Converters. Crossover pipes are
available with Resonators or Standard for unrestricted flow and
optimized sound.
Bullet Exhaust System
The Bullet is the most aggressive performance exhaust system to be
released, and has quickly become the industry standard for a deep,
aggressive muscle car sound. Your C6 can see performance gains of up to
18 rear wheel horse power and 17 foot pounds of torque from the Bullet.
If you want to tone your Bullet down just a little bit, a great
options is the PRT x-pipe section with resonators. This will help to
smooth out the exhaust pulses and take the edge off the Bullet while
maintaining that aggressive tone.
PRT Exhaust System
The Billy Boat Performance Exhaust PRT C6 exhaust system is the
latest in resonance control technology from B&B. Completey
redesigned and reengineered for the C6,
the system is simple indesign, though more complex in theory. You can
now have a mellow sound at cruising speeds and a sport note when you're
tearing up the streets. It allows true straight through exhaust passage
under agressive driving conditions, though a mellow sound is emitted at
cruising speeds thanks to the unique Purge Chamber. Designed especially
for the automatic, paddle shift, and cars with headers,this Billy Boat
Performance Exhaust PRT system works purely on physics and adrenaline.
Increases of 15hp and 14 ft.lbs over stock. gains of up to 18 rear wheel
horse power and 17 foot pounds of torque from the PRT.
If you want to tone your PRT down just a little bit, a great options
is the x-pipe section with resonators. This will help to smooth out
the exhaust pulses and take the edge off the PRT while maintaining that
aggressive tone.
Route 66 Exhaust System
The Route 66 system has a very distinctive muscle car idle note that
emits a true touring performance sound on the highway and will garner
an additional 11 rear wheel horsepower on your C6. Options for the Route
66 include an x-pipe (FCOR-0430) or the center muffler (FCOR-0440). It
is recommended that customers with a C6 automatic or paddle shift
transmission use the new PRT exhaust system, as it has shown to be the
best choice for those cars.
C6 Long Tube Headers / X-Pipes
Billy Boat Performance Exhaust has once again taken the Pole Position in the market by developing long tube header systems specifically for the C6 Corvette. The header design incorporates the correct firing sequence which pairs exhaust ports together for more efficient exhaust scavenging. Dyno testing, utilizing technology previously found in racing applications has shown an increase of horsepower and torque throughout the entire RPM range. This is a true bolt-on header, complete with hardware and gaskets, dedicated to the C6 Corvette. The new 1.75" tube flows seamlessly to a 3", 4-into-1 collector. Billy Boat Performance Exhaust also makes a variety of x-pipes for the c6 Corvette.
The x-pipe section evens the exhaust pulses with a sycronized crossover in the center section, resulting in a deeper, smoother tone.
|
